|
Oxygen
Masks, Cannulas and Connectors
Equipment for Flight Levels Above 25,000 feet
Oxygen
Mask, Cannulas, & Connectors > Equipment for Flight
Levels above 25,000 feet

DILUTER DEMAND MASKS
PRESSURE DEMAND MASKS
NEW – OVERHAUL – REPAIR - RECERTIFICATION
THE AIRPORT SHOPPE at this time is recommending Repair or Overhaul for your diluter demand and pressure demand masks. While we are quoting competitive costs for new masks (and for upgrades approved by your aircraft manufacturer), they are taking up to 120 days due to the current demands of our military. The masks pictured above have a price new from $5000 - $8000, depending on the configuration.
- A $550 FUNCTIONAL TEST IS REQUIRED for all masks, with the results determining repair or overhaul costs. Turnaround time for completion of any work approved is typically ten days. AOG costs can be quoted for completion in less time. **
- ESTIMATED COSTS (including a report on the condition of your mask and expected work needed) will be provided in writing for your approval and signature prior to any work performed. [Only occasionally are parts required in excess of those estimated - you would be notified immediately for approval prior to work resuming.]
- REPAIR COST is limited to parts and labor performed.
- OVERHAUL COST is generally under $2000, depending on its condition.***
** If the required functional test determines your mask to be beyond economical repair (BER), i.e. it would be more economical to buy a new mask; it can be scrapped for a $200 Disposal Fee or returned with no work performed for a $250 Evaluation Fee. [A mask is deemed BER when an overhaul is determined to cost more than 65% of a new mask.]
***An overhaul will be required if your mask 1) is found to be leaking and/or 2) has been in service longer than three years. Either condition indicates internal parts have begun to break down due to usage, weather or storage conditions. An overhaul includes both repair and recertification; the entire unit is disassembled and gone through from head to toe.
© 2008 The Airport Shoppe
SHIPPING INSTRUCTIONS
Insure each mask for $6500 (average replacement cost)
Tag each mask with your name, address and telephone number(s)
Credit Card information will be obtained via telephone upon receipt of your mask.
The Airport Shoppe
Reid Hillview Airport
2635 Cunningham Ave Ste A
San Jose CA 95148
info@airportshoppe.com
800.634.4744
Ask for Phoebe or Marilu - “The Oxygen Ladies"

359
Series
Crew Oxygen Breathing System
The AVOX Systems
359 Series Crew Oxygen Breathing System includes two different mask
suspensions and two different types of mask-mounted regulators providing
breathing protection to a cabin altitude of 40,000 feet. Any of the
masks can be combined with either of the regulators to best satisfy
the aircraft, FAA, and TSO requirements.
Vent-Valve
System
In emergency situations where smoke or noxious fumes are present, the
smoke goggle cavity could become contaminated and reduce the effectiveness
of air crew personnel. The AVOX Systems Vent-Valve System, in conjunction
with the regulator emergency pressure feature, is
designed to combat this problem. Operated by a manual push-pull control
knob (A) located on the nosepiece of the mask, the vent-valve (B) diverts
a small flow of oxygen from the mask into the goggle area, thereby
raising the pressure and purging smoke or fumes to the ambient.
If seeking a replacement,
please use this chart (PDF) to determine your current part number

893 Series
Air Crew Oxygen Breathing System
Outstanding Features
- Quick-donning
oral-nasal mask assembly designed to provide breathing
protection to 40,000 feet.
- Mask can be donned and supplying oxygen in
under five seconds.
- Miniature mask-mounted Diluter/Demand Regulator
features manual selector for
100% oxygen or NORMAL (air/oxygen) dilution. Regulator is well-marked
and
located on the assembly for easy monitoring.
- Duo-Seal® oral-nasal
facepiece is made of natural rubber for long duration comfort.
Inner and outer seals are controlled by breathing. Harness is adjustable.
- Microphone
assembly is mounted separately, eliminating the necessity of removing
both the regulator and microphone assemblies should either require
service.
Microphone plug-in is compatible for use with most standard aircraft
communication systems.
The AVOX Systems 893 Series Oxygen Breathing System is compact, lightweight,
rugged, and provides comfortable breathing protection to 40,000 feet.
The mask is TSO-C78 approved and can be donned and functioning in under
five
seconds. The Duo-Seal® facepiece is made of natural rubber and
is adjustable for
maximum comfort.
The system
includes a TSO-C89 approved mask-mounted regulator that features
an inhalation/exhalation diaphragm to minimize mask pressure swing.
An optional
microphone assembly is mounted separately for servicing convenience,
and is
compatible with most standard communication systems.
For
pricing and availability, please e-mail The Oxygen Lady at info@airportshoppe.com.
We will need to determine mask/suspension, microphone, regulator, hose
and connector styles. If seeking a replacement, please use the chart
below to determine your current part number: 
|